When buying a motorhome, camper van or urban vehicle (hereafter: motorhome), it is particularly important to choose the right layout and an appealing design. In addition, weight also plays an essential role. Family, friends, optional equipment, accessories and baggage – space must be available for all of these. At the same time, there are legal and technical limits to the configuration and load. Every motorhome is designed for a certain weight, which may not be exceeded during driving. For motorhome buyers, this raises the question: How should I configure my vehicle to accommodate passengers, baggage and accessories according to my needs without the vehicle exceeding this maximum weight? In order to make this decision easier for you, we provide you below with a few tips that are particularly important when selecting your vehicle from our portfolio:
1. The technically permissible maximum laden mass…
… is a value set by the manufacturer which the vehicle may not exceed. CROSSCAMP specifies a layout-related upper limit for the vehicle, which can vary from layout to layout (e.g. 3,500 kg, 4,400 kg). You can find the corresponding specification for each layout in the technical data.
2. The mass in running order…
... consists – to put it simply – of the basic vehicle with standard equipment plus a standard weight of 75 kg for the driver. It is legally permissible and possible for the mass in running order of your vehicle to deviate from the nominal value stated in the sales documents. The permissible tolerance is ± 5 %. The permissible range in kilograms is given in brackets after the mass in running order. In order to provide you with full transparency regarding possible weight deviations, CROSSCAMP weighs each vehicle at the end of the line and informs your trade partner of your vehicle's weighing result for forwarding to you.
Detailed explanations on the subject of mass in running order can be found in the “Legal Information” section.
3. The permitted number of seats (including driver)…
… is determined by the manufacturer in what is referred to as the type-approval procedure. This results in what is referred to as the mass of the passengers. For this, a standard weight of 75 kg per passenger (without driver) is calculated.
Detailed explanations on the subject of mass of the passengers can be found in the “Legal Information” section.
4. The manufacturer-specified mass for optional equipment…
… is a value set by CROSSCAMP per layout for the maximum mass of optional equipment that can be ordered. This limit is intended to ensure that the minimum pay-mass, i.e. the legally prescribed free mass for baggage and retrofitted accessories, is actually available for the vehicle load capacity of the vehicles delivered by CROSSCAMP. If, in exceptional cases, the weighing at the end of the line nevertheless shows that the actual load capacity falls short of the minimum pay-mass due to a permissible weight deviation, we will check together with your trade partner and you whether we should, for example, increase the load capacity of the vehicle, reduce the number of seats or remove optional equipment before delivering the vehicle.
Detailed explanations on the subject of the effects of the tolerances on the minimum pay-mass and the payload can be found in the “Legal Information” section.
5. The additional weight of optional equipment and packages...
... increases the actual mass of the vehicle (= mass in running order plus selected optional equipment) and reduces the pay-mass. The specified value shows the additional weight compared to the standard equipment of the respective layout. The total weight of the selected packages and optional equipment must not exceed the manufacturer-specified mass for optional equipment.
| Description | Value |
|---|---|
| Standard chassis | Peugeot Boxer Low Platform |
| Standard engine | 140 MultiJet 3 |
| kW (bhp) | 103 (140) |
| Emission standards | Euro 6e-bis |
| Overall length, approx. | 696 |
| Overall width, approx. | 235 |
| Overall height, approx. | 294 |
| Headroom in living area, approx. | 213 |
| Towable load braked/unbraked | 2000 / 750 |
| Wheelbase, approx. | 3800 |
| Bed dimension: Front bed, L x W, approx. | 198 x 140 - 120 |
| Bed dimension: Central / middle bed, L x W, approx. | 211 x 102 - 77 |
| Bed dimension: Rear bed, L x W, approx. | 205 x 80 / 195 x 80 / 210 x 173 |
| Sleeping berths standard / max. | 2 / 5 |
| Mass in running order (+/-5%)* | 2800 (2660 - 2940)* |
| Manufacturer-specified mass for optional equipment* | 356 |
| Technically permissible maximum laden mass* | 3499 |
| Permitted number of seats (including driver)* | 4 - 5 |
| Refrigerator volume (thereof freezer), approx. | 131 (15) / 131 (15) |
| Waste water tank, approx. | 90 |
| Fresh water tank capacity, total/ Fresh water tank capacity at driving filling | 116 / 20 |
| Measurement storage opening right (W x H) | 75 x 110 |
| Measurement storage opening left (W x H) | 75 x 90 |
| Peugeot chassis features |
|---|
| Peugeot Boxer (3,499 kg), MultiJet 140 (2.2l / 103 kW / 140 hp), 6-speed manual transmission |
| 15" steel wheel rim |
| Peugeot chassis features |
|---|
| Anti-theft device |
| Cruise control |
| Daytime running lights integrated into headlights |
| Driver's cab manual A/C |
| Front-wheel drive |
| Driver and passenger airbags |
| Captain seat, double armrests, swivel function with height and tilt adjustment for driver and front passenger seat |
| ABS (anti-lock braking system) / EBD (electronic brakeforce distribution) |
| Electrically adjustable and heated exterior mirrors incl. blind spot mirror and integrated turn indicator |
| Preparation for radio system incl. loudspeakers in the driver's cabin |
| ESP incl. ASR, Traction Plus, Hill Holder and Hill Descent Control |
| Exterior colour chassis Expedition Grey |
| Widened rear axle |
| Diesel tank 90 litre incl. 19L AdBlue tank |
| Cup holder in the centre of the dashboard |
| Multifunctional steering wheel |
| Tyre inflation kit and towing eye |
| DAB+ radio antenna integrated into right exterior mirror |
| Automatic Brake Assist after a collision |
| Crosswind Assist |
| Driver and passenger detection |
| Trailer Stability Assist |
| Tyres M+S Camping (with snowflake) |
| Exterior features |
|---|
| Opening window in T-hood |
| Panoramic clear glass skylight 40 x 40 cm above the seating lounge incl. fly screen and blackout |
| Panoramic clear glass skylight 40 x 40 cm above the rear bed including fly screen and blackout |
| Double-glazed flush-fitting windows with blackout & mosquito protection, steplessly adjustable |
| Bedroom windows right and left with blackout & mosquito screen |
| 70 cm wide living room door with "CC" coat hook and practical textile bag |
| Habitation access with comfortable, wide, electric step |
| Large rear garage: two garage doors/flaps with turn/tighten lock, rear lowering (150 kg surface load), anti-slip surface, heated, lashing strips, illuminated, 1x 230 V socket |
| Crosscamp Blackline rear light carrier with 3rd brake light |
| Crosscamp body technology: GRP-clad underbody and roof with proven reliable floor and body construction with excellent insulation |
| GRP roof |
| EPS insulation |
| Floor thickness: 38 mm, side wall thickness: 34 mm, and roof thickness: 35 mm |
| Side panels and rear panel made of resistant high-gloss GRP with smooth, shiny surface |
| Exterior design |
|---|
| Exterior paint finish habitation Grey |
| Crosscamp exterior design with black rear light carrier, black side skirts, and design stickers |
| Interior design |
|---|
| Décor Makalu Pearl Grey |
| Upholstery Caroni |
| Furniture layouts |
|---|
| Modern entrance module with practical entry handle, "CC" coat hook, and practical textile bag |
| Seating area with mountable and extendible table and two integrated 3-point seatbelts |
| Window cladding in living area in Crosscamp wood panel look |
| Overhead locker doors with soft-close function |
| Roof cabinets in the rear with lateral holders for textile roof cabinet bags (available via Custom Parts) |
| High-level single beds incl. comfortable access via steps |
| Single beds convert to double bed |
| Rear beds with ergonomic wooden slatted frames and 110 mm thick 7-zone premium mattresses made from climate-regulating material |
| Kitchen |
|---|
| Room-high compressor refrigerator with separate freezer compartment (131 l) |
| MultiFlex rail system (additional accessories available via Crosscamp Custom Parts) |
| Gourmet kitchen: 2-burner cooker, spacious drawer with cutlery insert, doors with flexible shelves, and generous work surface as well as holder for waste bin (available via Custom Parts) |
| Kitchen rear wall in Crosscamp wood panel look |
| Bathroom |
|---|
| Equipment with cabinets, storage areas, hooks, large mirror, and large mounted washbasin |
| Swiveling bathroom wall for optimal use of space |
| Heating |
|---|
| Gas hot air heating 4kW with hot water boiler |
| Heating in the seating unit for optimum heat distribution, built-in |
| Electrical installation |
|---|
| On-board control panel |
| EBL with separate FI protection switch |
| Automatic switch-on/disconnect for starter battery, leisure battery and refrigerator |
| Number of sockets: 1x 12V, 6x 230V, 4x USB |
| Leisure battery AGM, 95 Ah |
| Awning light 12 V |
| LED lighting throughout the vehicle |
| Spotlights in the roof lining above the habitation door |
| Functional lighting (surface-mounted and recessed spotlights) |
| Water supply |
|---|
| Fresh water tank in insulated and heated area |
| Submersible pump |
| Gas supply |
|---|
| Storage space for 2 gas bottles with 11 kg filling weight each |
| Peugeot chassis features |
|---|
| Peugeot Boxer (3,499 kg), MultiJet 140 (2.2l / 103 kW / 140 hp), 8-speed automatic transmission |
| Peugeot Boxer (3,499 kg), MultiJet 180 (2.2l / 132 kW / 180 hp), 8-speed automatic transmission |
| 16" alloy wheel, black |
| Peugeot chassis features |
|---|
| Tow hitch (observe maximum permitted trailer weight) |
| 5th seat with seat belt |
| Cab blackout blinds |
| Lane Keep Assist |
| Emergency Brake Assist with pedestrian detection |
| Intelligent speed assistant |
| Attention Assist |
| Rain and light sensor with automatic dimming |
| Full LED low beam |
| Fog lights incl. cornering light |
| Electric parking brake |
| Digital speedometer with 7” combination instrument |
| Wireless phone charger in the central console |
| Traffic Sign Assist |
| Painted front bumper in body colour incl. black skid plate |
| Dashboard with aluminium application |
| Leather steering wheel and gear knob withleather sleeve |
| Driver's cab automatic A/C |
| Exterior features |
|---|
| Bike rack for 3 bikes (rear) |
| Black cassette awning Omnistor 4.0 m (manual) |
| Flyscreen habitation door |
| Interior design |
|---|
| Upholstery Canaima including driver and passenger seat covers |
| Furniture layouts |
|---|
| Bed convert for seating lounge transverse |
| Electric pull-down bed across the seating unit |
| ISOFIX child seat bracket for third and fourth seat facing direction of travel |
| Bathroom |
|---|
| Shower grate |
| Multimedia |
|---|
| Naviceiver including DAB+, truck navigation, wireless Apple CarPlay & Android Car |
| Rear view camera (single camera) |
| 5G Wi-Fi router incl. 4x4 roof antenna |
| 5G Wi-Fi router including 4x4 roof antenna with 22" HD TV including holder |
| Pre-wiring for satellite system |
| Pre-wiring for first rear view camera |
| Heating |
|---|
| Gas hot air heating 6kW with 1.8kW electric heating element & digital control panel |
| Digital control element for hot air heating |
| Air Conditioning |
|---|
| Pre-wiring for roof A/C |
| Electrical installation |
|---|
| Second leisure battery AGM, 95 Ah |
| Light Moments: Indirect ambient lighting above the overhead lockers |
| Light Moments: Illuminated window panelling in the living room |
| Light Moments: Illuminated kitchen splashback |
| Pre-wiring for solar |
| Water supply |
|---|
| Insulated waste water tank |
| Gas supply |
|---|
| Automatic gas bottle switchover including crash sensor and EisEx |
| Packages |
|---|
| Design Chassis Kit |
| Design Chassis Kit ACC |
| Base Kit |
| Chassis Kit |
| Pre-wiring kit |
| Waste Container |
| Water Filter |
| Single pack replacement cartridg |
| Double pack replacement cartridge |
| Additional child's bed |
| Retrofittable multi-functional rail |
| Isolation du tableau de bord |
| Leg Rest |
| Leg Rest |
| Hook set - silver |
| Retrofittable multi-functional rail |
| Kitchen pull-out |
| Textile overhead locker |
| Storage tray |
| Multimedia package - Wireless CarPlay |
| Storage shelf- silver |
| Set of 3 hooks for kitchen rail |
| Driver's cab carpet |
| Smart Battery System 2er-block without Display |
| Smart Battery System 5-block without display |
| Smart Battery System 5-block including display |
| Storage Shelf |
| Storage tray incl. Rubber strap |
| Vehicle length | 696 |
| Vehicle width | |
| Height | 294 |
| Height with extended pop-up roof | |
| Headroom with extended pop-up roof | |
| Bed dimensions, front | 140 x 198 |
| Bed dimensions, middle | 102 x 211 |
| Bed dimensions, rear | 80 x 205 |
| Bed dimensions, rear | 80 x 195 |
| Bed dimensions, rear | 173 x 210 |
When buying a motorhome, camper van or urban vehicle (hereafter: motorhome), it is particularly important to choose the right layout and an appealing design. In addition, weight also plays an essential role. Family, friends, optional equipment, accessories and baggage – space must be available for all of these. At the same time, there are legal and technical limits to the configuration and load. Every motorhome is designed for a certain weight, which may not be exceeded during driving. For motorhome buyers, this raises the question: How should I configure my vehicle to accommodate passengers, baggage and accessories according to my needs without the vehicle exceeding this maximum weight? In order to make this decision easier for you, we provide you below with a few tips that are particularly important when selecting your vehicle from our portfolio:
1. The technically permissible maximum laden mass…
… is a value set by the manufacturer which the vehicle may not exceed. CROSSCAMP specifies a layout-related upper limit for the vehicle, which can vary from layout to layout (e.g. 3,500 kg, 4,400 kg). You can find the corresponding specification for each layout in the technical data.
2. The mass in running order…
... consists – to put it simply – of the basic vehicle with standard equipment plus a standard weight of 75 kg for the driver. It is legally permissible and possible for the mass in running order of your vehicle to deviate from the nominal value stated in the sales documents. The permissible tolerance is ± 5 %. The permissible range in kilograms is given in brackets after the mass in running order. In order to provide you with full transparency regarding possible weight deviations, CROSSCAMP weighs each vehicle at the end of the line and informs your trade partner of your vehicle's weighing result for forwarding to you.
Detailed explanations on the subject of mass in running order can be found in the “Legal Information” section.
3. The permitted number of seats (including driver)…
… is determined by the manufacturer in what is referred to as the type-approval procedure. This results in what is referred to as the mass of the passengers. For this, a standard weight of 75 kg per passenger (without driver) is calculated.
Detailed explanations on the subject of mass of the passengers can be found in the “Legal Information” section.
4. The manufacturer-specified mass for optional equipment…
… is a value set by CROSSCAMP per layout for the maximum mass of optional equipment that can be ordered. This limit is intended to ensure that the minimum pay-mass, i.e. the legally prescribed free mass for baggage and retrofitted accessories, is actually available for the vehicle load capacity of the vehicles delivered by CROSSCAMP. If, in exceptional cases, the weighing at the end of the line nevertheless shows that the actual load capacity falls short of the minimum pay-mass due to a permissible weight deviation, we will check together with your trade partner and you whether we should, for example, increase the load capacity of the vehicle, reduce the number of seats or remove optional equipment before delivering the vehicle.
Detailed explanations on the subject of the effects of the tolerances on the minimum pay-mass and the payload can be found in the “Legal Information” section.
5. The additional weight of optional equipment and packages...
... increases the actual mass of the vehicle (= mass in running order plus selected optional equipment) and reduces the pay-mass. The specified value shows the additional weight compared to the standard equipment of the respective layout. The total weight of the selected packages and optional equipment must not exceed the manufacturer-specified mass for optional equipment.
| Description | Value |
|---|---|
| Standard chassis | Peugeot Boxer Low Platform |
| Standard engine | 140 MultiJet 3 |
| kW (bhp) | 103 (140) |
| Emission standards | Euro 6e-bis |
| Overall length, approx. | 741 |
| Overall width, approx. | 235 |
| Overall height, approx. | 294 |
| Headroom in living area, approx. | 213 |
| Towable load braked/unbraked | 2000 / 750 |
| Wheelbase, approx. | 4035 |
| Bed dimension: Front bed, L x W, approx. | 198 x 140 - 120 |
| Bed dimension: Central / middle bed, L x W, approx. | 211 x 117 - 77 |
| Bed dimension: Rear bed, L x W, approx. | 210 x 80 / 205 x 80 / 210 x 191 |
| Sleeping berths standard / max. | 2 / 5 |
| Mass in running order (+/-5%)* | 2840 (2698 - 2982)* |
| Manufacturer-specified mass for optional equipment* | 312 |
| Technically permissible maximum laden mass* | 3499 |
| Permitted number of seats (including driver)* | 4 - 5 |
| Refrigerator volume (thereof freezer), approx. | 131 (15) / 131 (15) |
| Waste water tank, approx. | 90 |
| Fresh water tank capacity, total/ Fresh water tank capacity at driving filling | 116 / 20 |
| Measurement storage opening right (W x H) | 93 x 110 |
| Measurement storage opening left (W x H) | 95 x 90 |
| Peugeot chassis features |
|---|
| Peugeot Boxer (3,499 kg), MultiJet 140 (2.2l / 103 kW / 140 hp), 6-speed manual transmission |
| 15" steel wheel rim |
| Peugeot chassis features |
|---|
| Anti-theft device |
| Cruise control |
| Daytime running lights integrated into headlights |
| Driver's cab manual A/C |
| Front-wheel drive |
| Driver and passenger airbags |
| Captain seat, double armrests, swivel function with height and tilt adjustment for driver and front passenger seat |
| ABS (anti-lock braking system) / EBD (electronic brakeforce distribution) |
| Electrically adjustable and heated exterior mirrors incl. blind spot mirror and integrated turn indicator |
| Preparation for radio system incl. loudspeakers in the driver's cabin |
| ESP incl. ASR, Traction Plus, Hill Holder and Hill Descent Control |
| Exterior colour chassis Expedition Grey |
| Widened rear axle |
| Diesel tank 90 litre incl. 19L AdBlue tank |
| Cup holder in the centre of the dashboard |
| Multifunctional steering wheel |
| Tyre inflation kit and towing eye |
| DAB+ radio antenna integrated into right exterior mirror |
| Automatic Brake Assist after a collision |
| Crosswind Assist |
| Driver and passenger detection |
| Trailer Stability Assist |
| Tyres M+S Camping (with snowflake) |
| Exterior features |
|---|
| Opening window in T-hood |
| Panoramic clear glass skylight 40 x 40 cm above the seating lounge incl. fly screen and blackout |
| Panoramic clear glass skylight 40 x 40 cm above the rear bed including fly screen and blackout |
| Double-glazed flush-fitting windows with blackout & mosquito protection, steplessly adjustable |
| Bedroom windows right and left with blackout & mosquito screen |
| 70 cm wide living room door with "CC" coat hook and practical textile bag |
| Habitation access with comfortable, wide, electric step |
| Large rear garage: two garage doors/flaps with turn/tighten lock, rear lowering (150 kg surface load), anti-slip surface, heated, lashing strips, illuminated, 1x 230 V socket |
| Crosscamp Blackline rear light carrier with 3rd brake light |
| Crosscamp body technology: GRP-clad underbody and roof with proven reliable floor and body construction with excellent insulation |
| GRP roof |
| EPS insulation |
| Floor thickness: 38 mm, side wall thickness: 34 mm, and roof thickness: 35 mm |
| Side panels and rear panel made of resistant high-gloss GRP with smooth, shiny surface |
| Exterior design |
|---|
| Exterior paint finish habitation Grey |
| Crosscamp exterior design with black rear light carrier, black side skirts, and design stickers |
| Interior design |
|---|
| Décor Makalu Pearl Grey |
| Upholstery Caroni |
| Furniture layouts |
|---|
| Modern entrance module with practical entry handle, "CC" coat hook, and practical textile bag |
| Practical shoe compartment, easily accessible in the entrance area |
| Seating area with mountable and extendible table and two integrated 3-point seatbelts |
| Window cladding in living area in Crosscamp wood panel look |
| Overhead locker doors with soft-close function |
| Roof cabinets in the rear with lateral holders for textile roof cabinet bags (available via Custom Parts) |
| High-level single beds incl. comfortable access via steps |
| Single beds convert to double bed |
| Rear beds with ergonomic wooden slatted frames and 110 mm thick 7-zone premium mattresses made from climate-regulating material |
| Kitchen |
|---|
| Room-high compressor refrigerator with separate freezer compartment (131 l) |
| MultiFlex rail system (additional accessories available via Crosscamp Custom Parts) |
| Gourmet kitchen: 2-burner cooker, spacious drawer with cutlery insert, doors with flexible shelves, and generous work surface as well as holder for waste bin (available via Custom Parts) |
| Kitchen rear wall in Crosscamp wood panel look |
| Bathroom |
|---|
| Equipment with cabinets, storage areas, hooks, large mirror, and large mounted washbasin |
| Large bathroom with separate shower and toilet with locking door to the lounge |
| Heating |
|---|
| Gas hot air heating 4kW with hot water boiler |
| Heating in the seating unit for optimum heat distribution, built-in |
| Electrical installation |
|---|
| On-board control panel |
| EBL with separate FI protection switch |
| Automatic switch-on/disconnect for starter battery, leisure battery and refrigerator |
| Number of sockets: 1x 12V, 6x 230V, 4x USB |
| Leisure battery AGM, 95 Ah |
| Awning light 12 V |
| LED lighting throughout the vehicle |
| Spotlights in the roof lining above the habitation door |
| Functional lighting (surface-mounted and recessed spotlights) |
| Water supply |
|---|
| Fresh water tank in insulated and heated area |
| Submersible pump |
| Gas supply |
|---|
| Storage space for 2 gas bottles with 11 kg filling weight each |
| Peugeot chassis features |
|---|
| Peugeot Boxer (3,499 kg), MultiJet 140 (2.2l / 103 kW / 140 hp), 8-speed automatic transmission |
| Peugeot Boxer (3,499 kg), MultiJet 180 (2.2l / 132 kW / 180 hp), 8-speed automatic transmission |
| 16" alloy wheel, black |
| Peugeot chassis features |
|---|
| Tow hitch (observe maximum permitted trailer weight) |
| 5th seat with seat belt |
| Cab blackout blinds |
| Lane Keep Assist |
| Emergency Brake Assist with pedestrian detection |
| Intelligent speed assistant |
| Attention Assist |
| Rain and light sensor with automatic dimming |
| Full LED low beam |
| Fog lights incl. cornering light |
| Electric parking brake |
| Digital speedometer with 7” combination instrument |
| Wireless phone charger in the central console |
| Traffic Sign Assist |
| Painted front bumper in body colour incl. black skid plate |
| Dashboard with aluminium application |
| Leather steering wheel and gear knob withleather sleeve |
| Driver's cab automatic A/C |
| Exterior features |
|---|
| Bike rack for 3 bikes (rear) |
| Black cassette awning Omnistor 4.5 m (manual) |
| Flyscreen habitation door |
| Interior design |
|---|
| Upholstery Canaima including driver and passenger seat covers |
| Furniture layouts |
|---|
| Bed convert for seating lounge transverse |
| Electric pull-down bed across the seating unit |
| ISOFIX child seat bracket for third and fourth seat facing direction of travel |
| Bathroom |
|---|
| Shower grate |
| Multimedia |
|---|
| Naviceiver including DAB+, truck navigation, wireless Apple CarPlay & Android Car |
| Rear view camera (single camera) |
| 5G Wi-Fi router incl. 4x4 roof antenna |
| 5G Wi-Fi router including 4x4 roof antenna with 22" HD TV including holder |
| Pre-wiring for satellite system |
| Pre-wiring for first rear view camera |
| Heating |
|---|
| Gas hot air heating 6kW with 1.8kW electric heating element & digital control panel |
| Digital control element for hot air heating |
| Air Conditioning |
|---|
| Pre-wiring for roof A/C |
| Electrical installation |
|---|
| Second leisure battery AGM, 95 Ah |
| Light Moments: Indirect ambient lighting above the overhead lockers |
| Light Moments: Illuminated window panelling in the living room |
| Light Moments: Illuminated kitchen splashback |
| Pre-wiring for solar |
| Water supply |
|---|
| Insulated waste water tank |
| Gas supply |
|---|
| Automatic gas bottle switchover including crash sensor and EisEx |
| Packages |
|---|
| Design Chassis Kit |
| Design Chassis Kit ACC |
| Base Kit |
| Chassis Kit |
| Pre-wiring kit |
| Waste Container |
| Water Filter |
| Single pack replacement cartridg |
| Double pack replacement cartridge |
| Additional child's bed |
| Retrofittable multi-functional rail |
| Isolation du tableau de bord |
| Leg Rest |
| Leg Rest |
| Hook set - silver |
| Retrofittable multi-functional rail |
| Kitchen pull-out |
| Textile overhead locker |
| Storage tray |
| Multimedia package - Wireless CarPlay |
| Storage shelf- silver |
| Set of 3 hooks for kitchen rail |
| Driver's cab carpet |
| Smart Battery System 2er-block without Display |
| Smart Battery System 5-block without display |
| Smart Battery System 5-block including display |
| Storage Shelf |
| Storage tray incl. Rubber strap |
| Vehicle length | 741 |
| Vehicle width | |
| Height | 294 |
| Height with extended pop-up roof | |
| Headroom with extended pop-up roof | |
| Bed dimensions, front | 140 x 198 |
| Bed dimensions, middle | 117 x 211 |
| Bed dimensions, rear | 80 x 210 |
| Bed dimensions, rear | 80 x 205 |
| Bed dimensions, rear | 191 x 210 |
When buying a motorhome, camper van or urban vehicle (hereafter: motorhome), it is particularly important to choose the right layout and an appealing design. In addition, weight also plays an essential role. Family, friends, optional equipment, accessories and baggage – space must be available for all of these. At the same time, there are legal and technical limits to the configuration and load. Every motorhome is designed for a certain weight, which may not be exceeded during driving. For motorhome buyers, this raises the question: How should I configure my vehicle to accommodate passengers, baggage and accessories according to my needs without the vehicle exceeding this maximum weight? In order to make this decision easier for you, we provide you below with a few tips that are particularly important when selecting your vehicle from our portfolio:
1. The technically permissible maximum laden mass…
… is a value set by the manufacturer which the vehicle may not exceed. CROSSCAMP specifies a layout-related upper limit for the vehicle, which can vary from layout to layout (e.g. 3,500 kg, 4,400 kg). You can find the corresponding specification for each layout in the technical data.
2. The mass in running order…
... consists – to put it simply – of the basic vehicle with standard equipment plus a standard weight of 75 kg for the driver. It is legally permissible and possible for the mass in running order of your vehicle to deviate from the nominal value stated in the sales documents. The permissible tolerance is ± 5 %. The permissible range in kilograms is given in brackets after the mass in running order. In order to provide you with full transparency regarding possible weight deviations, CROSSCAMP weighs each vehicle at the end of the line and informs your trade partner of your vehicle's weighing result for forwarding to you.
Detailed explanations on the subject of mass in running order can be found in the “Legal Information” section.
3. The permitted number of seats (including driver)…
… is determined by the manufacturer in what is referred to as the type-approval procedure. This results in what is referred to as the mass of the passengers. For this, a standard weight of 75 kg per passenger (without driver) is calculated.
Detailed explanations on the subject of mass of the passengers can be found in the “Legal Information” section.
4. The manufacturer-specified mass for optional equipment…
… is a value set by CROSSCAMP per layout for the maximum mass of optional equipment that can be ordered. This limit is intended to ensure that the minimum pay-mass, i.e. the legally prescribed free mass for baggage and retrofitted accessories, is actually available for the vehicle load capacity of the vehicles delivered by CROSSCAMP. If, in exceptional cases, the weighing at the end of the line nevertheless shows that the actual load capacity falls short of the minimum pay-mass due to a permissible weight deviation, we will check together with your trade partner and you whether we should, for example, increase the load capacity of the vehicle, reduce the number of seats or remove optional equipment before delivering the vehicle.
Detailed explanations on the subject of the effects of the tolerances on the minimum pay-mass and the payload can be found in the “Legal Information” section.
5. The additional weight of optional equipment and packages...
... increases the actual mass of the vehicle (= mass in running order plus selected optional equipment) and reduces the pay-mass. The specified value shows the additional weight compared to the standard equipment of the respective layout. The total weight of the selected packages and optional equipment must not exceed the manufacturer-specified mass for optional equipment.
| Description | Value |
|---|---|
| Standard chassis | Peugeot Boxer Low Platform |
| Standard engine | 140 MultiJet 3 |
| kW (bhp) | 103 (140) |
| Emission standards | Euro 6e-bis |
| Overall length, approx. | 741 |
| Overall width, approx. | 235 |
| Overall height, approx. | 294 |
| Headroom in living area, approx. | 213 |
| Towable load braked/unbraked | 2000 / 750 |
| Wheelbase, approx. | 4035 |
| Bed dimension: Front bed, L x W, approx. | 198 x 140 - 120 |
| Bed dimension: Central / middle bed, L x W, approx. | 211 x 117 - 77 |
| Bed dimension: Rear bed, L x W, approx. | 190 x 150 |
| Sleeping berths standard / max. | 2 / 5 |
| Mass in running order (+/-5%)* | 2840 (2698 - 2982)* |
| Manufacturer-specified mass for optional equipment* | 312 |
| Technically permissible maximum laden mass* | 3499 |
| Permitted number of seats (including driver)* | 4 - 5 |
| Refrigerator volume (thereof freezer), approx. | 131 (15) / 131 (15) |
| Waste water tank, approx. | 90 |
| Fresh water tank capacity, total/ Fresh water tank capacity at driving filling | 116 / 20 |
| Measurement storage opening right (W x H) | 93 x 115 |
| Measurement storage opening left (W x H) | 95 x 95 |
| Peugeot chassis features |
|---|
| Peugeot Boxer (3,499 kg), MultiJet 140 (2.2l / 103 kW / 140 hp), 6-speed manual transmission |
| 15" steel wheel rim |
| Peugeot chassis features |
|---|
| Anti-theft device |
| Cruise control |
| Daytime running lights integrated into headlights |
| Driver's cab manual A/C |
| Front-wheel drive |
| Driver and passenger airbags |
| Captain seat, double armrests, swivel function with height and tilt adjustment for driver and front passenger seat |
| ABS (anti-lock braking system) / EBD (electronic brakeforce distribution) |
| Electrically adjustable and heated exterior mirrors incl. blind spot mirror and integrated turn indicator |
| Preparation for radio system incl. loudspeakers in the driver's cabin |
| ESP incl. ASR, Traction Plus, Hill Holder and Hill Descent Control |
| Exterior colour chassis Expedition Grey |
| Widened rear axle |
| Diesel tank 90 litre incl. 19L AdBlue tank |
| Cup holder in the centre of the dashboard |
| Multifunctional steering wheel |
| Tyre inflation kit and towing eye |
| DAB+ radio antenna integrated into right exterior mirror |
| Automatic Brake Assist after a collision |
| Crosswind Assist |
| Driver and passenger detection |
| Trailer Stability Assist |
| Tyres M+S Camping (with snowflake) |
| Exterior features |
|---|
| Opening window in T-hood |
| Panoramic clear glass skylight 40 x 40 cm above the seating lounge incl. fly screen and blackout |
| Panoramic clear glass skylight 40 x 40 cm above the rear bed including fly screen and blackout |
| Double-glazed flush-fitting windows with blackout & mosquito protection, steplessly adjustable |
| Bedroom windows right and left with blackout & mosquito screen |
| 70 cm wide living room door with "CC" coat hook and practical textile bag |
| Habitation access with comfortable, wide, electric step |
| Large rear garage: two garage doors/flaps with turn/tighten lock, rear lowering (150 kg surface load), anti-slip surface, heated, lashing strips, illuminated, 1x 230 V socket |
| Crosscamp Blackline rear light carrier with 3rd brake light |
| Crosscamp body technology: GRP-clad underbody and roof with proven reliable floor and body construction with excellent insulation |
| GRP roof |
| EPS insulation |
| Floor thickness: 38 mm, side wall thickness: 34 mm, and roof thickness: 35 mm |
| Side panels and rear panel made of resistant high-gloss GRP with smooth, shiny surface |
| Exterior design |
|---|
| Exterior paint finish habitation Grey |
| Crosscamp exterior design with black rear light carrier, black side skirts, and design stickers |
| Interior design |
|---|
| Décor Makalu Pearl Grey |
| Upholstery Caroni |
| Furniture layouts |
|---|
| Modern entrance module with practical entry handle, "CC" coat hook, and practical textile bag |
| Practical shoe compartment, easily accessible in the entrance area |
| Seating area with mountable and extendible table and two integrated 3-point seatbelts |
| Window cladding in living area in Crosscamp wood panel look |
| Overhead locker doors with soft-close function |
| Height-adjustable double bed, manual |
| Wardrobe to the left and right of the queen-size bed |
| Rear beds with ergonomic wooden slatted frames and 110 mm thick 7-zone premium mattresses made from climate-regulating material |
| Kitchen |
|---|
| Room-high compressor refrigerator with separate freezer compartment (131 l) |
| MultiFlex rail system (additional accessories available via Crosscamp Custom Parts) |
| Gourmet kitchen: 2-burner cooker, spacious drawer with cutlery insert, doors with flexible shelves, and generous work surface as well as holder for waste bin (available via Custom Parts) |
| Kitchen rear wall in Crosscamp wood panel look |
| Bathroom |
|---|
| Equipment with cabinets, storage areas, hooks, large mirror, and large mounted washbasin |
| Large bathroom with separate shower and toilet with locking door to the lounge |
| Heating |
|---|
| Gas hot air heating 4kW with hot water boiler |
| Heating in the seating unit for optimum heat distribution, built-in |
| Electrical installation |
|---|
| On-board control panel |
| EBL with separate FI protection switch |
| Automatic switch-on/disconnect for starter battery, leisure battery and refrigerator |
| Number of sockets: 1x 12V, 6x 230V, 4x USB |
| Leisure battery AGM, 95 Ah |
| Awning light 12 V |
| LED lighting throughout the vehicle |
| Spotlights in the roof lining above the habitation door |
| Functional lighting (surface-mounted and recessed spotlights) |
| Water supply |
|---|
| Fresh water tank in insulated and heated area |
| Submersible pump |
| Gas supply |
|---|
| Storage space for 2 gas bottles with 11 kg filling weight each |
| Peugeot chassis features |
|---|
| Peugeot Boxer (3,499 kg), MultiJet 140 (2.2l / 103 kW / 140 hp), 8-speed automatic transmission |
| Peugeot Boxer (3,499 kg), MultiJet 180 (2.2l / 132 kW / 180 hp), 8-speed automatic transmission |
| 16" alloy wheel, black |
| Peugeot chassis features |
|---|
| Tow hitch (observe maximum permitted trailer weight) |
| 5th seat with seat belt |
| Cab blackout blinds |
| Lane Keep Assist |
| Emergency Brake Assist with pedestrian detection |
| Intelligent speed assistant |
| Attention Assist |
| Rain and light sensor with automatic dimming |
| Full LED low beam |
| Fog lights incl. cornering light |
| Electric parking brake |
| Digital speedometer with 7” combination instrument |
| Wireless phone charger in the central console |
| Traffic Sign Assist |
| Painted front bumper in body colour incl. black skid plate |
| Dashboard with aluminium application |
| Leather steering wheel and gear knob withleather sleeve |
| Driver's cab automatic A/C |
| Exterior features |
|---|
| Bike rack for 3 bikes (rear) |
| Black cassette awning Omnistor 4.5 m (manual) |
| Flyscreen habitation door |
| Interior design |
|---|
| Upholstery Canaima including driver and passenger seat covers |
| Furniture layouts |
|---|
| Bed convert for seating lounge transverse |
| Electric pull-down bed across the seating unit |
| ISOFIX child seat bracket for third and fourth seat facing direction of travel |
| Bathroom |
|---|
| Shower grate |
| Multimedia |
|---|
| Naviceiver including DAB+, truck navigation, wireless Apple CarPlay & Android Car |
| Rear view camera (single camera) |
| 5G Wi-Fi router incl. 4x4 roof antenna |
| 5G Wi-Fi router including 4x4 roof antenna with 22" HD TV including holder |
| Pre-wiring for satellite system |
| Pre-wiring for first rear view camera |
| Heating |
|---|
| Gas hot air heating 6kW with 1.8kW electric heating element & digital control panel |
| Digital control element for hot air heating |
| Air Conditioning |
|---|
| Pre-wiring for roof A/C |
| Electrical installation |
|---|
| Second leisure battery AGM, 95 Ah |
| Light Moments: Indirect ambient lighting above the overhead lockers |
| Light Moments: Illuminated window panelling in the living room |
| Light Moments: Illuminated kitchen splashback |
| Pre-wiring for solar |
| Water supply |
|---|
| Insulated waste water tank |
| Gas supply |
|---|
| Automatic gas bottle switchover including crash sensor and EisEx |
| Packages |
|---|
| Design Chassis Kit |
| Design Chassis Kit ACC |
| Base Kit |
| Chassis Kit |
| Pre-wiring kit |
| Waste Container |
| Water Filter |
| Single pack replacement cartridg |
| Double pack replacement cartridge |
| Additional child's bed |
| Retrofittable multi-functional rail |
| Isolation du tableau de bord |
| Leg Rest |
| Leg Rest |
| Hook set - silver |
| Retrofittable multi-functional rail |
| Kitchen pull-out |
| Storage tray |
| Multimedia package - Wireless CarPlay |
| Storage shelf- silver |
| Set of 3 hooks for kitchen rail |
| Driver's cab carpet |
| Smart Battery System 2er-block without Display |
| Smart Battery System 5-block without display |
| Smart Battery System 5-block including display |
| Storage Shelf |
| Storage tray incl. Rubber strap |
| Vehicle length | 741 |
| Vehicle width | |
| Height | 294 |
| Height with extended pop-up roof | |
| Headroom with extended pop-up roof | |
| Bed dimensions, front | 140 x 198 |
| Bed dimensions, middle | 117 x 211 |
| Bed dimensions, rear | 150 x 190 |
