When buying a motorhome, camper van or urban vehicle (hereafter: motorhome), it is particularly important to choose the right layout and an appealing design. In addition, weight also plays an essential role. Family, friends, optional equipment, accessories and baggage – space must be available for all of these. At the same time, there are legal and technical limits to the configuration and load. Every motorhome is designed for a certain weight, which may not be exceeded during driving. For motorhome buyers, this raises the question: How should I configure my vehicle to accommodate passengers, baggage and accessories according to my needs without the vehicle exceeding this maximum weight? In order to make this decision easier for you, we provide you below with a few tips that are particularly important when selecting your vehicle from our portfolio:
1. The technically permissible maximum laden mass…
… is a value set by the manufacturer which the vehicle may not exceed. CROSSCAMP specifies a layout-related upper limit for the vehicle, which can vary from layout to layout (e.g. 3,500 kg, 4,400 kg). You can find the corresponding specification for each layout in the technical data.
2. The mass in running order…
... consists – to put it simply – of the basic vehicle with standard equipment plus a standard weight of 75 kg for the driver. It is legally permissible and possible for the mass in running order of your vehicle to deviate from the nominal value stated in the sales documents. The permissible tolerance is ± 5 %. The permissible range in kilograms is given in brackets after the mass in running order. In order to provide you with full transparency regarding possible weight deviations, CROSSCAMP weighs each vehicle at the end of the line and informs your trade partner of your vehicle's weighing result for forwarding to you.
Detailed explanations on the subject of mass in running order can be found in the “Legal Information” section.
3. The permitted number of seats (including driver)…
… is determined by the manufacturer in what is referred to as the type-approval procedure. This results in what is referred to as the mass of the passengers. For this, a standard weight of 75 kg per passenger (without driver) is calculated.
Detailed explanations on the subject of mass of the passengers can be found in the “Legal Information” section.
4. The manufacturer-specified mass for optional equipment…
… is a value set by CROSSCAMP per layout for the maximum mass of optional equipment that can be ordered. This limit is intended to ensure that the minimum pay-mass, i.e. the legally prescribed free mass for baggage and retrofitted accessories, is actually available for the vehicle load capacity of the vehicles delivered by CROSSCAMP. If, in exceptional cases, the weighing at the end of the line nevertheless shows that the actual load capacity falls short of the minimum pay-mass due to a permissible weight deviation, we will check together with your trade partner and you whether we should, for example, increase the load capacity of the vehicle, reduce the number of seats or remove optional equipment before delivering the vehicle.
Detailed explanations on the subject of the effects of the tolerances on the minimum pay-mass and the payload can be found in the “Legal Information” section.
5. The additional weight of optional equipment and packages...
... increases the actual mass of the vehicle (= mass in running order plus selected optional equipment) and reduces the pay-mass. The specified value shows the additional weight compared to the standard equipment of the respective layout. The total weight of the selected packages and optional equipment must not exceed the manufacturer-specified mass for optional equipment.
| Description | Value |
|---|---|
| Standard chassis | Peugeot Boxer |
| Standard engine | 2.2 BlueHDi |
| kW (bhp) | 103 (140) |
| Emission standards | Euro 6e-bis |
| Overall length, approx. | 541 |
| Overall width, approx. | 205 |
| Overall width with mirrors, approx. | 265 |
| Overall height, approx. | 258 / 278 |
| Overall height (open pop-top roof) | 358 |
| Headroom in living area, approx. | 189 |
| Towable load braked/unbraked | 2500 / 750 |
| Wheelbase, approx. | 345 |
| Bed dimension: Central / middle bed, L x W, approx. | 185 x 87 - 63 |
| Bed dimension: Rear bed, L x W, approx. | 195 x 133 - 130 |
| Bed dimension: pop-up roof, L x W, approx. | 209 x 143 |
| Sleeping berths standard / max. | 2 / 5 |
| Mass in running order (+/-5%)* | 2651 (2518 - 2784)* |
| Manufacturer-specified mass for optional equipment* | 504 |
| Technically permissible maximum laden mass* | 3500 |
| Permitted number of seats (including driver)* | 4 |
| Waste water tank, approx. | 90 |
| Fresh water tank capacity, total/ Fresh water tank capacity at driving filling | 100 / 20 |
| Base vehicle engine Peugeot |
|---|
| Peugeot Boxer BlueHDi 140 (2.2 l / 140 hp / 103 kW) - 3,499 kg gross vehicle weight |
| Base vehicle equipment Peugeot |
|---|
| USB socket (B+C) |
| All-weather tyres M+S* Camping Snowflake |
| Tyres: 15-inch steel rims (light) 16-inch steel rims (maxi/automatic) |
| Fix & Go puncture repair kit: tyre inflation kit and towing eye |
| Cup Holder |
| Cab air conditioning |
| Passenger airbag |
| Headlight frame black |
| Cruise control |
| Electrically adjustable and heated exterior mirrors |
| 90 litre diesel tank |
| Driver/passenger seat in living area fabric |
| DAB antenna in mirror, speakers, steering wheel radio control |
| Captain Chair and Traction+ (Traction+ not for 540 lengths) |
| Exterior colours Peugeot |
|---|
| Expedition Grey |
| Exterior structure |
|---|
| Skylight in the bathroom with integrated fly screen |
| Mini-Heki 40 x 40 cm above the rear area with flyscreen and blackout blinds |
| Mini-Heki roof hatch 40 x 40 cm above seating area with fly screen and blackout blind |
| Flyscreen door |
| Opening window |
| Windows with fly screen and blackout blind in rear doors |
| Windows with fly screens and blackout blinds in the kitchen and at the seating area |
| Exterior decals ADVTR |
| Interior construction / living space |
|---|
| Ergonomically arranged kitchen with generous work surface |
| Spacious kitchen base cabinet with servo-soft drawer |
| 2-burner stove and sink combination with electric ignition |
| Compressor refrigerator 84 l incl. freezer compartment 6.1 l |
| Multifunctional rail on the kitchen back panel (for matching accessories) |
| Partition wall incl. steps to enter the rear double bed |
| Upholstery Caroni |
| Wood décor: Makalu Pearl Grey / Cozy White / Trace Darkgrey |
| Ergonomically shaped pads for more sitting comfort |
| Platform of the seating group with integrated storage compartment |
| Generous storage space and storage options |
| Storage compartments in rear and sliding doors |
| CROSSCAMP coat hooks |
| Design cladding of side wall seating and kitchen |
| Rear storage space with 4 integrated lashing eyes |
| Rear bed with partial slatted frame |
| High-quality mattresses for increased sleeping comfort |
| Bathroom with fixed washbasin and cassette toilet |
| Generous storage space in the bathroom |
| Heating |
|---|
| Hot air heating 4 kW with hot water boiler |
| Board control panel with indication of all fill levels and battery capacities |
| Water supply |
|---|
| Water tank 100l, waste water tank 90l |
| Gas |
|---|
| Gas shut-off valves easily accessible and centrally located |
| Storage compartment for two gas bottles, each with 11 kg filling weight |
| Electrical installation |
|---|
| Sockets: 1x 12V, 3x 230V, 1x double USB |
| LED profile light in kitchen (overhead cabinet) |
| Rear storage compartment lighting |
| CEE exterior socket for 230 V with circuit breaker |
| Electric charger for habitation and vehicle battery 12 V / 18 A (trickle charge) |
| Powerful, maintenance-free battery (95 Ah) |
| Individually adjustable LED reading spots |
| Podium of seating group with indirect lighting and automatic door opening |
| Safety |
|---|
| Isofix |
| Base vehicle engine Peugeot |
|---|
| Peugeot Boxer BlueHDi 140 (2.2 l / 140 hp / 103 kW) - 3,499 kg gross vehicle weight - automatic transmission |
| Peugeot Boxer BlueHDi 180 (2.2 l / 180 hp / 132 kW) - 3,499 kg gross vehicle weight - automatic transmission |
| Base vehicle equipment Peugeot |
|---|
| 16" alloy wheels in black (light) |
| Maxi/automatic chassis: 16" bicolour alloy wheels |
| Leather-trimmed steering wheel and gear knob |
| Techno Trim |
| Bumpers in body color |
| Skid plate black |
| Fog light |
| Exterior structure |
|---|
| Pop-up roof black, opens completely at the front incl. electric closing assistant, fly screen, gooseneck light and USB socket, with high-quality mattress |
| Midi-Heki 70 x 50 cm above the seating group with flyscreen and blackout blinds |
| Framed windows in living area (tilting windows in rear doors) |
| Window in the bathroom |
| Window with fly screen and blackout blind in rear left |
| Electric entry step |
| Awning (5.4 DF) |
| Interior construction / living space |
|---|
| Folding privacy screen in driver's cab: windscreen |
| Folding privacy screen in driver's cab: side windows |
| Upholstery Canaima |
| Guest bed across the living area |
| Shower equipment (pull-out shower head, shower curtain, guide rail, shower holder) |
| Wooden grate in the shower |
| Clothes rail in the bathroom |
| Swivelling plate table extension |
| Heating |
|---|
| Gas-electric heating Combi 6E including digital control panel |
| Water supply |
|---|
| Waste water tank insulated and heated |
| Gas |
|---|
| Automatic gas cylinder switchover incl. crash sensor and EisEx |
| Electrical installation |
|---|
| Second habitation battery 95 Ah |
| USB socket in light rail |
| TV preparation 12V and TV socket, satellite connection |
| Pre-wiring solar system |
| Pre-wiring for rear view camera |
| Packages |
|---|
| Alu Kit (for manual transmission) |
| Alu Kit (for automatic transmission) |
| Style Kit |
| Base Kit |
| Volt Kit |
| Miscellaneous |
|---|
| Registration documents (CoC papers) |
| Shower head bracket for outside shower |
| Bicycle Rack |
| 18-inch complete wheels |
| Mosquito Net |
| Gecko feet for telescopic ladder |
| Reversing camera with ambient lighting |
| Number plate holder |
| Naviceiver Zenec Z-E3776EHG |
| Multimedia Package |
| Water Filter |
| Single pack replacement cartridg |
| Double pack replacement cartridge |
| Navigation map |
| Folding Box Set of 3 |
| Thermal insulation for rear doors |
| Additional child's bed |
| Retrofittable multi-functional rail |
| Pull-Out |
| Basket |
| Isolation du tableau de bord |
| Leg Rest |
| Leg Rest |
| Hook set - silver |
| Retrofittable multi-functional rail |
| Storage tray |
| Multimedia Package - Wireless CarPlay |
| Storage shelf- silver |
| Set of 3 hooks for kitchen rail |
| Folding Box |
| Driver's cab carpet |
| Smart Battery System 2er-block without Display |
| Smart Battery System 5-block without display |
| Smart Battery System 5-block including display |
| Charge indicator |
| Storage Shelf |
| Storage tray incl. Rubber strap |
| Vehicle length | 541 |
| Vehicle width | 265 |
| Height | 258 |
| Height with extended pop-up roof | 358 |
| Headroom with extended pop-up roof | |
| Bed dimensions, rear | 133 x 195 |
| Bed dimensions, middle | 87 x 185 |
| Bed dimensions, top | 143 x 209 |
When buying a motorhome, camper van or urban vehicle (hereafter: motorhome), it is particularly important to choose the right layout and an appealing design. In addition, weight also plays an essential role. Family, friends, optional equipment, accessories and baggage – space must be available for all of these. At the same time, there are legal and technical limits to the configuration and load. Every motorhome is designed for a certain weight, which may not be exceeded during driving. For motorhome buyers, this raises the question: How should I configure my vehicle to accommodate passengers, baggage and accessories according to my needs without the vehicle exceeding this maximum weight? In order to make this decision easier for you, we provide you below with a few tips that are particularly important when selecting your vehicle from our portfolio:
1. The technically permissible maximum laden mass…
… is a value set by the manufacturer which the vehicle may not exceed. CROSSCAMP specifies a layout-related upper limit for the vehicle, which can vary from layout to layout (e.g. 3,500 kg, 4,400 kg). You can find the corresponding specification for each layout in the technical data.
2. The mass in running order…
... consists – to put it simply – of the basic vehicle with standard equipment plus a standard weight of 75 kg for the driver. It is legally permissible and possible for the mass in running order of your vehicle to deviate from the nominal value stated in the sales documents. The permissible tolerance is ± 5 %. The permissible range in kilograms is given in brackets after the mass in running order. In order to provide you with full transparency regarding possible weight deviations, CROSSCAMP weighs each vehicle at the end of the line and informs your trade partner of your vehicle's weighing result for forwarding to you.
Detailed explanations on the subject of mass in running order can be found in the “Legal Information” section.
3. The permitted number of seats (including driver)…
… is determined by the manufacturer in what is referred to as the type-approval procedure. This results in what is referred to as the mass of the passengers. For this, a standard weight of 75 kg per passenger (without driver) is calculated.
Detailed explanations on the subject of mass of the passengers can be found in the “Legal Information” section.
4. The manufacturer-specified mass for optional equipment…
… is a value set by CROSSCAMP per layout for the maximum mass of optional equipment that can be ordered. This limit is intended to ensure that the minimum pay-mass, i.e. the legally prescribed free mass for baggage and retrofitted accessories, is actually available for the vehicle load capacity of the vehicles delivered by CROSSCAMP. If, in exceptional cases, the weighing at the end of the line nevertheless shows that the actual load capacity falls short of the minimum pay-mass due to a permissible weight deviation, we will check together with your trade partner and you whether we should, for example, increase the load capacity of the vehicle, reduce the number of seats or remove optional equipment before delivering the vehicle.
Detailed explanations on the subject of the effects of the tolerances on the minimum pay-mass and the payload can be found in the “Legal Information” section.
5. The additional weight of optional equipment and packages...
... increases the actual mass of the vehicle (= mass in running order plus selected optional equipment) and reduces the pay-mass. The specified value shows the additional weight compared to the standard equipment of the respective layout. The total weight of the selected packages and optional equipment must not exceed the manufacturer-specified mass for optional equipment.
| Description | Value |
|---|---|
| Standard chassis | Peugeot Boxer |
| Standard engine | 2.2 BlueHDi |
| kW (bhp) | 103 (140) |
| Emission standards | Euro 6e-bis |
| Overall length, approx. | 599 |
| Overall width, approx. | 205 |
| Overall width with mirrors, approx. | 265 |
| Overall height, approx. | 258 / 278 |
| Overall height (open pop-top roof) | 358 |
| Headroom in living area, approx. | 189 |
| Towable load braked/unbraked | 2500 / 750 |
| Wheelbase, approx. | 404 |
| Bed dimension: Central / middle bed, L x W, approx. | 185 x 105 - 88 |
| Bed dimension: Rear bed, L x W, approx. | 197 x 157 - 150 |
| Bed dimension: pop-up roof, L x W, approx. | 209 x 143 |
| Sleeping berths standard / max. | 2 / 5 |
| Mass in running order (+/-5%)* | 2751 (2613 - 2889)* |
| Manufacturer-specified mass for optional equipment* | 402 |
| Technically permissible maximum laden mass* | 3500 |
| Permitted number of seats (including driver)* | 4 |
| Waste water tank, approx. | 90 |
| Fresh water tank capacity, total/ Fresh water tank capacity at driving filling | 100 / 20 |
| Base vehicle engine Peugeot |
|---|
| Peugeot Boxer BlueHDi 140 (2.2 l / 140 hp / 103 kW) - 3,499 kg gross vehicle weight |
| Base vehicle equipment Peugeot |
|---|
| USB socket (B+C) |
| All-weather tyres M+S* Camping Snowflake |
| Tyres: 15-inch steel rims (light) 16-inch steel rims (maxi/automatic) |
| Fix & Go puncture repair kit: tyre inflation kit and towing eye |
| Cup Holder |
| Cab air conditioning |
| Passenger airbag |
| Headlight frame black |
| Cruise control |
| Electrically adjustable and heated exterior mirrors |
| 90 litre diesel tank |
| Driver/passenger seat in living area fabric |
| DAB antenna in mirror, speakers, steering wheel radio control |
| Captain Chair and Traction+ (Traction+ not for 540 lengths) |
| Exterior colours Peugeot |
|---|
| Expedition Grey |
| Exterior structure |
|---|
| Skylight in the bathroom with integrated fly screen |
| Mini-Heki 40 x 40 cm above the rear area with flyscreen and blackout blinds |
| Mini-Heki roof hatch 40 x 40 cm above seating area with fly screen and blackout blind |
| Flyscreen door |
| Opening window |
| Windows with fly screen and blackout blind in rear doors |
| Windows with fly screens and blackout blinds in the kitchen and at the seating area |
| Exterior decals ADVTR |
| Interior construction / living space |
|---|
| Ergonomically arranged kitchen with generous work surface |
| Spacious kitchen base cabinet with servo-soft drawer |
| 2-burner stove and sink combination with electric ignition |
| Storage area behind cooker |
| Compressor refrigerator 84 l incl. freezer compartment 6.1 l |
| Multifunctional rail on the kitchen back panel (for matching accessories) |
| Partition wall incl. steps to enter the rear double bed |
| Upholstery Caroni |
| Wood décor: Makalu Pearl Grey / Cozy White / Trace Darkgrey |
| Ergonomically shaped pads for more sitting comfort |
| Platform of the seating group with integrated storage compartment |
| Generous storage space and storage options |
| Storage compartments in rear and sliding doors |
| Spacious wardrobe |
| CROSSCAMP coat hooks |
| Design cladding of side wall seating and kitchen |
| Rear storage space with 4 integrated lashing eyes |
| Rear bed with partial slatted frame |
| High-quality mattresses for increased sleeping comfort |
| Bathroom with fixed washbasin and cassette toilet |
| Generous storage space in the bathroom |
| Heating |
|---|
| Hot air heating 4 kW with hot water boiler |
| Board control panel with indication of all fill levels and battery capacities |
| Water supply |
|---|
| Water tank 100l, waste water tank 90l |
| Gas |
|---|
| Gas shut-off valves easily accessible and centrally located |
| Storage compartment for two gas bottles, each with 11 kg filling weight |
| Electrical installation |
|---|
| Sockets: 1x 12V, 3x 230V, 1x double USB |
| LED profile light in kitchen (overhead cabinet) |
| Rear storage compartment lighting |
| CEE exterior socket for 230 V with circuit breaker |
| Electric charger for habitation and vehicle battery 12 V / 18 A (trickle charge) |
| Powerful, maintenance-free battery (95 Ah) |
| Individually adjustable LED reading spots |
| Podium of seating group with indirect lighting and automatic door opening |
| Safety |
|---|
| Isofix |
| Base vehicle engine Peugeot |
|---|
| Peugeot Boxer BlueHDi 140 (2.2 l / 140 hp / 103 kW) - 3,499 kg gross vehicle weight - automatic transmission |
| Peugeot Boxer BlueHDi 180 (2.2 l / 180 hp / 132 kW) - 3,499 kg gross vehicle weight - automatic transmission |
| Base vehicle equipment Peugeot |
|---|
| 16" alloy wheels in black (light) |
| Maxi/automatic chassis: 16" bicolour alloy wheels |
| Leather-trimmed steering wheel and gear knob |
| Techno Trim |
| Bumpers in body color |
| Skid plate black |
| Fog light |
| Exterior structure |
|---|
| Pop-up roof black, opens completely at the front incl. electric closing assistant, fly screen, gooseneck light and USB socket, with high-quality mattress |
| Midi-Heki 70 x 50 cm above the seating group with flyscreen and blackout blinds |
| Framed windows in living area (tilting windows in rear doors) |
| Window in the bathroom |
| Window with fly screen and blackout blind in rear left |
| Electric entry step |
| Awning (6.0 DF) |
| Interior construction / living space |
|---|
| Folding privacy screen in driver's cab: windscreen |
| Folding privacy screen in driver's cab: side windows |
| Upholstery Canaima |
| Guest bed across the living area |
| Shower equipment (pull-out shower head, shower curtain, guide rail, shower holder) |
| Wooden grate in the shower |
| Clothes rail in the bathroom |
| Swivelling plate table extension |
| Heating |
|---|
| Gas-electric heating Combi 6E including digital control panel |
| Water supply |
|---|
| Waste water tank insulated and heated |
| Gas |
|---|
| Automatic gas cylinder switchover incl. crash sensor and EisEx |
| Electrical installation |
|---|
| Second habitation battery 95 Ah |
| USB socket in light rail |
| TV preparation 12V and TV socket, satellite connection |
| Pre-wiring solar system |
| Pre-wiring for rear view camera |
| Packages |
|---|
| Alu Kit (for manual transmission) |
| Alu Kit (for automatic transmission) |
| Style Kit |
| Base Kit |
| Volt Kit |
| Miscellaneous |
|---|
| Registration documents (CoC papers) |
| Shower head bracket for outside shower |
| Bicycle Rack |
| 18-inch complete wheels |
| Mosquito Net |
| Gecko feet for telescopic ladder |
| Reversing camera with ambient lighting |
| Number plate holder |
| Naviceiver Zenec Z-E3776EHG |
| Multimedia Package |
| Water Filter |
| Single pack replacement cartridg |
| Double pack replacement cartridge |
| Navigation map |
| Folding Box Set of 3 |
| Thermal insulation for rear doors |
| Additional child's bed |
| Rear Extension |
| Retrofittable multi-functional rail |
| Pull-Out |
| Basket |
| Isolation du tableau de bord |
| Leg Rest |
| Leg Rest |
| Hook set - silver |
| Retrofittable multi-functional rail |
| Storage tray |
| Multimedia Package - Wireless CarPlay |
| Storage shelf- silver |
| Set of 3 hooks for kitchen rail |
| Folding Box |
| Driver's cab carpet |
| Smart Battery System 2er-block without Display |
| Smart Battery System 5-block without display |
| Smart Battery System 5-block including display |
| Charge indicator |
| Storage Shelf |
| Storage tray incl. Rubber strap |
| Vehicle length | 599 |
| Vehicle width | 265 |
| Height | 258 |
| Height with extended pop-up roof | 358 |
| Headroom with extended pop-up roof | |
| Bed dimensions, rear | 157 x 197 |
| Bed dimensions, middle | 105 x 185 |
| Bed dimensions, top | 143 x 209 |
When buying a motorhome, camper van or urban vehicle (hereafter: motorhome), it is particularly important to choose the right layout and an appealing design. In addition, weight also plays an essential role. Family, friends, optional equipment, accessories and baggage – space must be available for all of these. At the same time, there are legal and technical limits to the configuration and load. Every motorhome is designed for a certain weight, which may not be exceeded during driving. For motorhome buyers, this raises the question: How should I configure my vehicle to accommodate passengers, baggage and accessories according to my needs without the vehicle exceeding this maximum weight? In order to make this decision easier for you, we provide you below with a few tips that are particularly important when selecting your vehicle from our portfolio:
1. The technically permissible maximum laden mass…
… is a value set by the manufacturer which the vehicle may not exceed. CROSSCAMP specifies a layout-related upper limit for the vehicle, which can vary from layout to layout (e.g. 3,500 kg, 4,400 kg). You can find the corresponding specification for each layout in the technical data.
2. The mass in running order…
... consists – to put it simply – of the basic vehicle with standard equipment plus a standard weight of 75 kg for the driver. It is legally permissible and possible for the mass in running order of your vehicle to deviate from the nominal value stated in the sales documents. The permissible tolerance is ± 5 %. The permissible range in kilograms is given in brackets after the mass in running order. In order to provide you with full transparency regarding possible weight deviations, CROSSCAMP weighs each vehicle at the end of the line and informs your trade partner of your vehicle's weighing result for forwarding to you.
Detailed explanations on the subject of mass in running order can be found in the “Legal Information” section.
3. The permitted number of seats (including driver)…
… is determined by the manufacturer in what is referred to as the type-approval procedure. This results in what is referred to as the mass of the passengers. For this, a standard weight of 75 kg per passenger (without driver) is calculated.
Detailed explanations on the subject of mass of the passengers can be found in the “Legal Information” section.
4. The manufacturer-specified mass for optional equipment…
… is a value set by CROSSCAMP per layout for the maximum mass of optional equipment that can be ordered. This limit is intended to ensure that the minimum pay-mass, i.e. the legally prescribed free mass for baggage and retrofitted accessories, is actually available for the vehicle load capacity of the vehicles delivered by CROSSCAMP. If, in exceptional cases, the weighing at the end of the line nevertheless shows that the actual load capacity falls short of the minimum pay-mass due to a permissible weight deviation, we will check together with your trade partner and you whether we should, for example, increase the load capacity of the vehicle, reduce the number of seats or remove optional equipment before delivering the vehicle.
Detailed explanations on the subject of the effects of the tolerances on the minimum pay-mass and the payload can be found in the “Legal Information” section.
5. The additional weight of optional equipment and packages...
... increases the actual mass of the vehicle (= mass in running order plus selected optional equipment) and reduces the pay-mass. The specified value shows the additional weight compared to the standard equipment of the respective layout. The total weight of the selected packages and optional equipment must not exceed the manufacturer-specified mass for optional equipment.
| Description | Value |
|---|---|
| Standard chassis | Peugeot Boxer |
| Standard engine | 2.2 BlueHDi |
| kW (bhp) | 103 (140) |
| Emission standards | Euro 6e-bis |
| Overall length, approx. | 636 |
| Overall width, approx. | 205 |
| Overall width with mirrors, approx. | 265 |
| Overall height, approx. | 258 / 278 |
| Overall height (open pop-top roof) | 358 |
| Headroom in living area, approx. | 189 |
| Towable load braked/unbraked | 2500 / 750 |
| Wheelbase, approx. | 404 |
| Bed dimension: Central / middle bed, L x W, approx. | 185 x 105 - 88 |
| Bed dimension: Rear bed, L x W, approx. | 192 - 184 x 195 |
| Bed dimension: pop-up roof, L x W, approx. | 209 x 143 |
| Sleeping berths standard / max. | 2 / 5 |
| Mass in running order (+/-5%)* | 2836 (2694 - 2978)* |
| Manufacturer-specified mass for optional equipment* | 310 |
| Technically permissible maximum laden mass* | 3500 |
| Permitted number of seats (including driver)* | 4 |
| Waste water tank, approx. | 90 |
| Fresh water tank capacity, total/ Fresh water tank capacity at driving filling | 100 / 20 |
| Base vehicle engine Peugeot |
|---|
| Peugeot Boxer BlueHDi 140 (2.2 l / 140 hp / 103 kW) - 3,499 kg gross vehicle weight |
| Base vehicle equipment Peugeot |
|---|
| USB socket (B+C) |
| All-weather tyres M+S* Camping Snowflake |
| Tyres: 15-inch steel rims (light) 16-inch steel rims (maxi/automatic) |
| Fix & Go puncture repair kit: tyre inflation kit and towing eye |
| Cup Holder |
| Cab air conditioning |
| Passenger airbag |
| Headlight frame black |
| Cruise control |
| Electrically adjustable and heated exterior mirrors |
| 90 litre diesel tank |
| Driver/passenger seat in living area fabric |
| DAB antenna in mirror, speakers, steering wheel radio control |
| Captain Chair and Traction+ (Traction+ not for 540 lengths) |
| Exterior colours Peugeot |
|---|
| Expedition Grey |
| Exterior structure |
|---|
| Skylight in the bathroom with integrated fly screen |
| Mini-Heki 40 x 40 cm above the rear area with flyscreen and blackout blinds |
| Mini-Heki roof hatch 40 x 40 cm above seating area with fly screen and blackout blind |
| Flyscreen door |
| Opening window |
| Windows with fly screen and blackout blind in rear doors |
| Windows with fly screens and blackout blinds in the kitchen and at the seating area |
| Exterior decals ADVTR |
| Interior construction / living space |
|---|
| Ergonomically arranged kitchen with generous work surface |
| Spacious kitchen base cabinet with servo-soft drawer |
| 2-burner stove and sink combination with electric ignition |
| Storage area behind cooker |
| Compressor refrigerator 84 l incl. freezer compartment 6.1 l |
| Multifunctional rail on the kitchen back panel (for matching accessories) |
| Partition wall incl. steps to enter the rear double bed |
| Upholstery Caroni |
| Wood décor: Makalu Pearl Grey / Cozy White / Trace Darkgrey |
| Ergonomically shaped pads for more sitting comfort |
| Platform of the seating group with integrated storage compartment |
| Generous storage space and storage options |
| Storage compartments in rear and sliding doors |
| Spacious wardrobe |
| CROSSCAMP coat hooks |
| Design cladding of side wall seating and kitchen |
| Rear storage space with 4 integrated lashing eyes |
| Rear bed with partial slatted frame |
| High-quality mattresses for increased sleeping comfort |
| Bathroom with fixed washbasin and cassette toilet |
| Generous storage space in the bathroom |
| Heating |
|---|
| Hot air heating 4 kW with hot water boiler |
| Board control panel with indication of all fill levels and battery capacities |
| Water supply |
|---|
| Water tank 100l, waste water tank 90l |
| Gas |
|---|
| Gas shut-off valves easily accessible and centrally located |
| Storage compartment for two gas bottles, each with 11 kg filling weight |
| Electrical installation |
|---|
| Sockets: 1x 12V, 3x 230V, 1x double USB |
| LED profile light in kitchen (overhead cabinet) |
| Rear storage compartment lighting |
| CEE exterior socket for 230 V with circuit breaker |
| Electric charger for habitation and vehicle battery 12 V / 18 A (trickle charge) |
| Powerful, maintenance-free battery (95 Ah) |
| Individually adjustable LED reading spots |
| Podium of seating group with indirect lighting and automatic door opening |
| Safety |
|---|
| Isofix |
| Base vehicle engine Peugeot |
|---|
| Peugeot Boxer BlueHDi 140 (2.2 l / 140 hp / 103 kW) - 3,499 kg gross vehicle weight - automatic transmission |
| Peugeot Boxer BlueHDi 180 (2.2 l / 180 hp / 132 kW) - 3,499 kg gross vehicle weight - automatic transmission |
| Base vehicle equipment Peugeot |
|---|
| 16" alloy wheels in black (light) |
| Maxi/automatic chassis: 16" bicolour alloy wheels |
| Leather-trimmed steering wheel and gear knob |
| Techno Trim |
| Bumpers in body color |
| Skid plate black |
| Fog light |
| Exterior structure |
|---|
| Pop-up roof black, opens completely at the front incl. electric closing assistant, fly screen, gooseneck light and USB socket, with high-quality mattress |
| Midi-Heki 70 x 50 cm above the seating group with flyscreen and blackout blinds |
| Framed windows in living area (tilting windows in rear doors) |
| Window in the bathroom |
| Window with fly screen and blackout blind in rear left |
| Electric entry step |
| Awning (6.4 EF) |
| Interior construction / living space |
|---|
| Folding privacy screen in driver's cab: windscreen |
| Folding privacy screen in driver's cab: side windows |
| Upholstery Canaima |
| Guest bed across the living area |
| Shower equipment (pull-out shower head, shower curtain, guide rail, shower holder) |
| Wooden grate in the shower |
| Clothes rail in the bathroom |
| Swivelling plate table extension |
| Heating |
|---|
| Gas-electric heating Combi 6E including digital control panel |
| Water supply |
|---|
| Waste water tank insulated and heated |
| Gas |
|---|
| Automatic gas cylinder switchover incl. crash sensor and EisEx |
| Electrical installation |
|---|
| Second habitation battery 95 Ah |
| USB socket in light rail |
| TV preparation 12V and TV socket, satellite connection |
| Pre-wiring solar system |
| Pre-wiring for rear view camera |
| Packages |
|---|
| Alu Kit (for manual transmission) |
| Alu Kit (for automatic transmission) |
| Style Kit |
| Base Kit |
| Volt Kit |
| Miscellaneous |
|---|
| Registration documents (CoC papers) |
| Shower head bracket for outside shower |
| Bicycle Rack |
| 18-inch complete wheels |
| Mosquito Net |
| Gecko feet for telescopic ladder |
| Reversing camera with ambient lighting |
| Number plate holder |
| Naviceiver Zenec Z-E3776EHG |
| Multimedia Package |
| Water Filter |
| Single pack replacement cartridg |
| Double pack replacement cartridge |
| Navigation map |
| Folding Box Set of 3 |
| Thermal insulation for rear doors |
| Additional child's bed |
| Rear Extension |
| Retrofittable multi-functional rail |
| Pull-Out |
| Basket |
| Isolation du tableau de bord |
| Leg Rest |
| Leg Rest |
| Hook set - silver |
| Retrofittable multi-functional rail |
| Storage tray |
| Multimedia Package - Wireless CarPlay |
| Storage shelf- silver |
| Set of 3 hooks for kitchen rail |
| Folding Box |
| Driver's cab carpet |
| Smart Battery System 2er-block without Display |
| Smart Battery System 5-block without display |
| Smart Battery System 5-block including display |
| Charge indicator |
| Storage Shelf |
| Storage tray incl. Rubber strap |
| Vehicle length | 636 |
| Vehicle width | 265 |
| Height | 258 |
| Height with extended pop-up roof | 358 |
| Headroom with extended pop-up roof | |
| Bed dimensions, rear | 195 x 192 |
| Bed dimensions, middle | 105 x 185 |
| Bed dimensions, top | 143 x 209 |
